CONSTRUCTION BLOG: ROCK ROW
Slow Home Award Video
The Driveway Is Growing
LEED Certification Official: 10 Platinum / 5 Gold
Phase 2 Update
Numerologically Correct Addresses
105 Responses in 4 Days
Framing Part II Begins
SubscribeROCK ROW RSS
The driveway concrete was finally poured today. Most of the driveway is going to be grasspave but there are two central concrete strips to handle the majority of the traffic going in and out. The pattern dimensions match the cement board siding sizes. The pattern is running bond (joints at the center of the adjacent block) instead of the offset pattern of the cement board so it looks similar but not like it is trying to duplicate the siding.
Picture 1: Formwork
The layout is based on 1) the cement board dimensions mentioned above, 2) the spacing for grass to grow in the seams is the width of two 2x4s to minimize waste 3) the spacing of car and truck wheels 4) the size of the grasspave block to minimize labor and waste.
Picture 2: Concrete Placing
It took eight guys all day to place and trowel finish the concrete.
Picture 3: Retarder
To give the concrete a sandblasted texture a retarder was sprayed on after the concrete was troweled. The retarder inhibits the chemical bonding of the cement on the surface of the concrete. After a couple hours it is washed off and takes the top 1/16" of cement with it. The retarder is the the white layer in the background of this photo.
Picture 4: Final Pavers
This is the final product about 8 hours after it was poured. The retarder has been washed off to expose the aggregate. Besides giving the concrete a more natural look this also eliminates the squeal of turning tires like you hear in parking garages. The next step is to place the base which the grasspave sits on and then start with the grasspave.